Deposits can be formed in the Paper machine due to sticky materials from wood and recycled paper. These deposits get stuck on process equipment and cause the product quality to deteriorate and the efficiency of the Paper machine is reduced. The purpose of this thesis is to increase the understanding about deposits among machine operators, and to suggest methods that can be used to reduce the amount of deposits formed in Bravikens Paper machines.To fulfill the purpose of the thesis a pre-study, a literature review and interviews with machine operators and production staff, were carried out. These methods led to the planning and creation of an education about deposits for machine operators.The education about deposits for machine operators consisted of an interactive lecture to introduce the subject of deposits and a subsequent discussion. This approach was chosen to give the machine operators the opportunity to discuss their work situation on the Paper machines related to their new knowledge about deposits.

The purpose of this Master's thesis is to find possible explanations of variation in light scattering in a fine paper. Samples were collected from each second tambour during a time period of two weeks from a Paper machine at MoDo Paper, Husum. Two data sets, consisting of 20 and 95 observations, were selected for extensive analysises of tensile and structual properties. The data was evaluated with multivariate data techniques using the programs Simca and Extract. The results of PCA- and PLS- analysises pointed out 3 of 52 variables as important for the variations in light scattering.

Abstract (in English)The work that lead to a CE- marking and the creation of a total drawing foundation on an existing machine carried out on the company Polytec Composites Sweden AB in Ljungby. The company have design an machine that exist in six example that runs in the production. To be able to use the machine the company have to work out a CE-marking. The process that summed up all the document that needs for the machine to make a CE-marking. The documentation includes a total drawing over the machine and a risk analysis performed by a group employers on the company.

Metso Paper offers a front-running range of solutions and services for the pulp and paper industry. At the baling unit, design solutions are developed for manufacturing and handling of pulp bales. The machines are continuously developed to satisfy customer needs. One big step in the development of the baling line was to remove hydraulics from the machines and replace it with electrical motors and pneumatics. This was not done on the folding machine which is still driven by mainly hydraulics.

Resignations are common in all business sectors and can also be found among forest machine operators in the forest business. As the industry today faces a lack of forest machine operators it is justified to determine why machine operators choose to quit their jobs. The aim of this study was to a) find out the number of machine operators that have resigned b) identify and analyse the cause for these resignations c) identify the reasons why the machine operators started to work in the forest and d) give suggestions on different measures that will limit resignations amongst forest machine operators. A questionnaire was sent to machine operators who have quit working as employees, contractors or as employees for contractors with Holmen Skog during 2003-2007. 32 machine operators responded to the questionnaire. Interviews were made with 10 machine operators who had answered the questionnaire to gather more qualitative data. The results of the study indicate that fewer forest machine operators change profession than employees in other occupations in Sweden.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

Our greatest interest within crop farming is to grow sugarbeets, that?s why we want to write about something new in this sector. We heard that a new concept had come to Sweden so we wanted to find out everything about this machine. This new technique was a self-propelled cleaning loader for sugarbeets. This machine is supposed to replace a loader and a cleaning machine when the sugarbeets is going to be loaded, cleaned and delivered to the sugerbeet factory. The cleaning loader picks up the sugarbeets with rollers from the pile, which is placed close to the road.

This paper describes the process of building a machine translation lexicon for use in the train and transport domain with the machine translation system MATS. The lexicon will consist of a Swedish part, an English part and links between them and is derived from a Tradostranslation memory which is split into a training(90%) part and a testing(10%) part. The task is carried out mainly by using existing word linking software and recycling previous machine translation lexicons from other domains. In order to do this, a method is developed where focus lies on automation by means of both existing and self developed software, in combination with manual interaction. The domain specific lexicon is then extended with a domain neutral core lexicon and a less domain neutral general lexicon.

AbstractWe have been honored to work with a company called Frimeko AB. Frimeko is located in Halmstad where they make and sell furniture for school and office environment. Our task is to construct a new, more modern sewing machine table for schools. The task is to use the same function as before, ease the storage and production of sewing machine.Efforts to develop the new sewing machine table resulted in that we came up with an innovative design that the company is pleased with.During this project the group has used the method from ?Fredy Olsson Konstruktion? .

When harvesting ley you hope to get a fast drying and a faster harvest. If there is a system with round bales, you need to have a dry matter close to 45 %. To make this as fast as possible, there is made a machine which pick up the grass with an pick-up. It turn the grass over and put it behind the machine (figure 2 and 4). There are few tests to prove the efficiency of this machine.

This study has been performed with the help of forest machine operators in order to improve the forestry planning at Holmen Skog Örnsköldsvik-region. For Holmen Skog forestry planning is basic for a successful forestry. In a survey I have investigated what can be improved in some areas that are planned for harvesting. The result of the investigation will be used to support the machine operators as much as possible. The study has generated 49.5 % of responses and because of this low response rate, no clear conclusions to anyone else except the responding machine operators can be drawn. It has been proved that there are some details in the forestry planning system that are inadequate, such as marked routs for trails, tractor paths and buffer zones against streams. The quality of forestry planning varies greatly between different locations, as much as 50 % of the responding machine operators thought so. Over 40 % of the responding machine operators claim that the information from Holmen is insufficient. One thing that would improve the forestry planning within Holmen would be to educate all forestry planners and then do continuous follow-ups..

This report was performed in order to evaluate a new technological measure and focuses generally on a heat pump system to a HWC-washing machine. The client is Asko Appliances AB, a company well known for its environmentally friendly products. The goal of this study was to improve the energy efficiency of a washing machine by combining a heat pump device to the heater of the wash water, in order to reduce the energy consumed for heating the water. Besides reducing the energy consumption in heating the water, the washing machine was required to meet low noise and short operating time specifications. For that purpose, nine trials in three test series have been carried out.

There is a need for productivities data and data for different types of machines for comminution of logging residues. The lack of data and studies on GROT comminution makes it difficult to evaluate different chains for handling of residue fuels and make system analyses.Four types of machines with three different working principles were compared at six studies during winter conditions. Three to eleven trials during 9.5 to 30.7 minutes were made on each machine. Samples from the produced material at each study were sieved to determine the size distribution of the comminuted material. Samples were also taken from the studies for determination of moisture content.

The purpose of this paper is to examine the three main translation methods used in experimental Cross-language Information Retrieval CLIR research today, namely translation using either machine-readable dictionaries, machine translation systems or corpus-based methods. Working notes from research groups participating in the Text Retrieval Conference TREC and the Cross-Language Evaluation Forum CLEF between 1997 and 2000 have provided the main source material used to discuss the possible advantages and drawbacks that each method presents. It appears that all three approaches have their pros and cons, and because the different researchers tend to favour their own chosen method, it is not possible to establish a "winner approach" to CLIR translation by studying the working notes alone. One should remember however that the present interest in cross-language-applications of information retrieval has arisen as late as in the 1990s, and thus the research is yet in its early stages. The methods discussed in this paper may well be improved, or perhaps replaced by others in the future..

The comprehensive goal in this study was to examine important factors in an introduction of a new machine team. The aim was to identify what elements should be part of an introduction program for new machine team. The examination was done together with Stora Enso Skog. A new machine team and their supervisors where analyzed during a six month period. The evaluation was done with open interviews of the team members and their supervisors. The main question was what should be included in an introduction program to develop a successful machine team as effective as possible? Interviews of the new team and analyses gave good indications how the procedure should be done.